| Issue |
MATEC Web Conf.
Volume 173, 2018
2018 International Conference on Smart Materials, Intelligent Manufacturing and Automation (SMIMA 2018)
|
|
|---|---|---|
| Article Number | 01033 | |
| Number of page(s) | 5 | |
| Section | Modeling, Analysis, and Simulation of Intelligent Manufacturing Processes | |
| DOI | https://doi.org/10.1051/matecconf/201817301033 | |
| Published online | 19 June 2018 | |
The Investigation of Anti-Jamming Technology For Temperature Measure System in Spacecraft Thermal Test
Beijing Institute of Spacecraft Environment Engineering, YouYi Road, Beijing, China
* Corresponding author: Wanqing5010@126.com
At present, the spacecraft thermal test temperature measurement system has not been designed effectively. In the spacecraft experiment, the defects of anti-interference ability and system instability are exposed. Firstly, the composition and status of the temperature measurement system of spacecraft thermal test are analyzed. And then we set up a system to interfere with fault tree according to existing problems, locate the problem and determine the source of the interference. Finally, the anti-interference scheme and implementation are developed, and the test data of anti-interference test system is set up. The anti - jamming performance of the anti - jamming scheme of thermal test temperature acquisition system was evaluated. The results show that it can improve the anti-jamming capability of the spacecraft thermal test temperature acquisition system and improve the stability of the system.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.