MATEC Web Conf.
Volume 165, 201812th International Fatigue Congress (FATIGUE 2018)
|Number of page(s)||8|
|Section||Low Cycle Fatigue|
|Published online||25 May 2018|
Strain characteristics of non-ferrous metals obtained on the basic of different loads
Opole University of Technology, Faculty of Mechanical Engineering, Ul. Mikołajczyka 5, 45-271 Opole, Poland
* Corresponding author: firstname.lastname@example.org
The paper presents the comparison of the results of experimental fatigue tests for the 6082-T6 and 2017-T4 aluminium alloys. Tests performed under two types of load conditions. That is tensilecompressive and oscillatory bending. The results are obtained by applying the Basquin's stress-life equation and strain-life equations: Kandil’s equation, Langer’s equation and the authors’ own equation. On the basis of own experimental studies and the relevant physical relations, the stress and strain amplitudes occurring in bent rods under smooth specimens, were calculated according to the elastoplastic model. The results were then used to compare both types of loads with different types of control.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.