MATEC Web Conf.
Volume 165, 201812th International Fatigue Congress (FATIGUE 2018)
|Number of page(s)||5|
|Section||Corrosion Fatigue & Environmental Effects|
|Published online||25 May 2018|
A Non-Linear Model for Corrosion Fatigue Lifetime Based on Continuum Damage Mechanics
SIM vzw, Technologiepark 935, BE-9052 Zwijnaarde, Belgium
2 Soete Laboratory, Department of EEMMeCS, Ghent University, Ghent, Belgium
* Corresponding author: firstname.lastname@example.org
Many structures, such as oil platforms and wind turbines, are built in the marine environment. These structures do not merely suffer from variable cyclic loading due to wind, waves and current, but also from corrosion. Their interaction can give rise to corrosion fatigue, thus reducing the service life and integrity of the structure. The research community witnesses a challenge to identify damage mechanisms of combined fatigue loading and corrosion, and to link this to the lifetime prediction of offshore structures. In this paper, a non-linear corrosion fatigue model is proposed to describe damage accumulation based on continuum damage mechanics. Fatigue endurance limit, load frequency and corrosion rate are included in the model as basic parameters which influence the interaction between fatigue and corrosion. A sequential load effect is revealed via integration of the non-linear accumulation of damage. Parametric studies are conducted to show the abilities of the model. Preliminary simulation results agree to a strong extent with experimental data in the form of corrosion fatigue S-N curves. Nonetheless, deviations are observed at lower life times and these are prone to further investigation. In the future, parameters will be calibrated and further validation experiments will be performed.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.