| Issue |
MATEC Web Conf.
Volume 156, 2018
The 24th Regional Symposium on Chemical Engineering (RSCE 2017)
|
|
|---|---|---|
| Article Number | 06011 | |
| Number of page(s) | 4 | |
| Section | Reaction Engineering and Catalysis | |
| DOI | https://doi.org/10.1051/matecconf/201815606011 | |
| Published online | 14 March 2018 | |
Microwave-assisted Extraction of Natural Dyes from Coleus atropurpureus Leaves: The Effect of Solvent
Department of Chemical Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
* Corresponding author: mahfud@chem-eng.its.ac.id
Corresponding author: selfinagala90@gmail.com
A microwave-assisted extraction system was used to extract natural dyes from Coleus atropurpureus leaves. The effects of water solvent of the temperature at 100°C and 80°C as well as ethanol solvent 96% were investigated. This is done at the various material to solvent ratio (0.001, 0.0025, 0.005 g/mL) and microwave power (264, 400, 600 watt). The optimal conditions of the extraction were obtained on a water solvent of the temperature at 100°C with material to solvent ratio 0.001 g/mL, irradiation power 400 watt, extraction time 10 min, material size 35-60 mesh, the optimum yield of 44.48%. Identification of groups of pigments contained in the Coleus atropurpureus leaves is known categories tannins and flavonoids. Fourier Transform Infrared Spectroscopy was used to identify the major chemical groups in the extracted dyes.
Key words: Coleus atropurpureus / extraction / natural dye / microwave / solvent
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.