Issue |
MATEC Web Conf.
Volume 156, 2018
The 24th Regional Symposium on Chemical Engineering (RSCE 2017)
|
|
---|---|---|
Article Number | 05021 | |
Number of page(s) | 4 | |
Section | Materials and Processing | |
DOI | https://doi.org/10.1051/matecconf/201815605021 | |
Published online | 14 March 2018 |
Silicon Conversion From Bamboo Leaf Silica By Magnesiothermic Reduction for Development of Li-ion Baterry Anode
1
Department of Chemical Engineering, Faculty of Engineering, Diponegoro University, Jl. Prof. Sudarto, Tembalang-Semarang, 50275, Telp/fax: (024)7460058/(024)76480675
2
Master Degree of Department of Chemical Engineering, Faculty of Engineering, Diponegoro University, Jl. Prof. Sudarto, Tembalang-Semarang, 50275, Telp/fax: (024)7460058/(024)76480675
* Corresponding author: silviana@che.undip.ac.id
Silicon (Si) is a promising alternative material for the anode Lithium ion Battery (LIB). Si has a large theoretical capacity about 3579 mA hg-1, ten times greater than the commercial graphite anode (372 mA hg-1). Bamboo is a source of organic silica (bio-silica). Most part biogenetic content of SiO2 is obtained in bamboo leaves. This paper aims to investigate the synthesis nano Si from bamboo leaves through magnesiothermic reduction after silica extraction using sol–gel method and to observe nano Si of bamboo leaf as mixed material for lithium ion baterry. Silica and silicon content was determined using XRF. Silica product has 96,3 wt. % yield of extraction from bamboo leaf, while silicon yield was obtained 61.2 wt. %. The XRD pattern revealed that silica and silicon product were amourphous. The extracted silica and silicon from bambo leaf has spherical shape and agglomerated form. As anoda material for LIB, silicon product achieved 0,002 mAh capacity for 22 cycle.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.