MATEC Web Conf.
Volume 156, 2018The 24th Regional Symposium on Chemical Engineering (RSCE 2017)
|Number of page(s)||5|
|Section||Processes for Energy and Environment|
|Published online||14 March 2018|
Study of C/N Ratio Effect on Biogas Production of Carica Solid Waste by SS-AD Method And LS-AD
Departement of Chemical Engineering, Faculty of Engineering, Diponegoro University, 50239, Semarang, Indonesia
* Corresponding author: email@example.com
Biogas is a renewable energy which can be used as an alternative source to replace fossil fuels. Recently, the use of energy has become an important issue because the oil sources and natural gas are depleting. Utilization of carica waste to produce biogas can reduce the consumption of commercial energy sources such as kerosene as well as the use of firewood. Biogas is produced by the process of organic material digestion by certain anaerobic bacterial activity in anaerobic digester. In this study we studied the influence of LS-AD and SS-AD methods, the effect of C / N ratio on biogas yield obtained and kinetics of biogas production reaction. The study was conducted by making a total solid variation of 7%, 9%, 11%, 13%, 19%, 21%, 23% and C/N ratio 25 and 30. The study started with carica waste collection process and examination of the total composition of solids and water content. Thereafter, calculation and determination of variation of C / N ratio by mixing the substrate with inoculum and urea into the reactor. Observe the volume of biogas produced every two-day intervals. The highest biogas production rate of 1.7825 ml/g TS day was obtained from carica solid waste variable by liquid state anaerobic disgestion and C/N 25.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.