MATEC Web Conf.
Volume 154, 2018The 2nd International Conference on Engineering and Technology for Sustainable Development (ICET4SD 2017)
|Number of page(s)||5|
|Section||Engineering and Technology|
|Published online||28 February 2018|
Modified coal fly ash as low cost adsorbent for removal reactive dyes from batik industry
Chemical Engineering Department, Universitas Islam Indonesia, Indonesia
* Corresponding author: firstname.lastname@example.org
The removal of reactive dyes on modified coal fly ash has been investigated during a series of batch adsorption experiments. Physical characteristics of modified coal fly ash was characterized by Brunauer Emmett Teller (BET) surface area analysis, X-ray powder diffraction (XRD), Fourier transform infrared spectrophotometer (FT-IR), and scanning electron microscope (SEM). The effects of operational parameters such as initial dye concentration (50–200 mg/L), solution pH (4–10) and adsorbent dosage (50–200 mg/L) were studied. The adsorption experiments indicated that modified coal fly ash was effective in removing of Remazol Blue. The percentage removal of dyes increased while the modified fly ash dosage increased. The percentage removal of dyes increased with decreased initial concentration of the dye and also increased with amount of adsorbent used. The optimum of removal of dyes was found to be 94% at initial dye concentration 50 g/mL, modified fly ash dosage 250 g/mL, and pH of 2.0.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.