Issue |
MATEC Web Conf.
Volume 67, 2016
International Symposium on Materials Application and Engineering (SMAE 2016)
|
|
---|---|---|
Article Number | 07030 | |
Number of page(s) | 7 | |
Section | Chapter 7 Materials Application and Engineering | |
DOI | https://doi.org/10.1051/matecconf/20166707030 | |
Published online | 29 July 2016 |
Adsorption of Lead Ions by Linde type F(K) Zeolite
1 Department of City Science, Jiangsu City Vocational College, Nanjing 210036, China
2 School of Environmental and Chemical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212018, China
3 State Key Laboratory of Pollution Control and Resource Reuse, Center for Hydrosciences Research, School of the Environment, Nanjing University, Nanjing 210046, China
a hanch69@sina.com
b chenc@just.edu.cn
c wnchengting@sina.com
d xchxie@sina.com
* Corresponding author: hanch69@sina.com
The Test was to examine the adsorption property of Pb(II) irons by Linde type F (K) zeolite. The zeolite was synthesized by fly ash. The adsorbent dosage, pH, reaction temperature and reaction time were investigated. The adsorption isotherm and adsorption kinetics equation were studied. The results showed the adsorbent dosage, pH, reaction temperature and reaction time had significant effects on the adsorption of Pb(II) irons. The removal rate was improved with the increasing of zeolite dosage. The saturated adsorption capacity was decreased gradually. The adsorption of Pb(II) irons tended to saturate when initial pH was 6. With the increasing of temperature, the equilibration time of adsorption was shorter. Langmuir isotherm was more applicable to explain the monolayer adsorption procedure of Pb(II) on Linde type F(K) zeolite. For adsorption kinetics, pseudo-second order model showed better calculation results.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.