| Issue |
MATEC Web Conf.
Volume 251, 2018
VI International Scientific Conference “Integration, Partnership and Innovation in Construction Science and Education” (IPICSE-2018)
|
|
|---|---|---|
| Article Number | 05014 | |
| Number of page(s) | 5 | |
| Section | Management in Construction | |
| DOI | https://doi.org/10.1051/matecconf/201825105014 | |
| Published online | 14 December 2018 | |
Organizational and technological solutions justifying use of non-destructive methods of control when building monolithic constructions of civil buildings and structures
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: alan_khubaev@mail.ru
The parameters influencing on the use of non-destructive methods of control are considered when building monolithic constructions of civil and industrial buildings and structures. The analysis of the factor influence on the capacity of the method of the non-destructive control with the expert assessment method is made. Based on the qualimetric analysis three the most significant groups of the factors which can influence on the capacity of the use of the non-destructive control method (Pnc) are determined. The mathematical apparatus base is prepared, which characterize the object parameters.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.