MATEC Web Conf.
Volume 251, 2018VI International Scientific Conference “Integration, Partnership and Innovation in Construction Science and Education” (IPICSE-2018)
|Number of page(s)||7|
|Section||Engineering and Smart Systems in Construction|
|Published online||14 December 2018|
Design of interacting wells for optimization of investments and operating costs while constructing water-diverting structures
Voronezh State Technical University 84, 20-let Oktyabrya st., Voronezh, Russia
2 South-West State University 94, 50-let Oktyabrya st., Kursk, Russia
3 Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
4 Irkutsk National Research Technical University, 83, Lermontova st., Irkutsk, Russia
* Corresponding author: firstname.lastname@example.org
Constructions for water withdrawal are the constitutive building industry component. The cost of these constructions is rather high. That is why while designing it is necessary to choose optimal design model and operating conditions during design life. Operation experience showed that the wells are desirably placed along one line to provide the most optimal conditions for water withdrawal. While designing the wells interaction is considered as a group operation if the distance between them is less than two radiuses of influence. Such wells disposition allows reducing the area and cutting down the investments for water withdrawal construction and also creating the better conditions for equipment and mains operation. Design of interacting wells consists of finding the tube well number, the distance between them, the discharge and levels (static and dynamic). At operating condition determination, it is necessary to consider the combined action of pure water reservoirs and tube well.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.