MATEC Web Conf.
Volume 251, 2018VI International Scientific Conference “Integration, Partnership and Innovation in Construction Science and Education” (IPICSE-2018)
|Number of page(s)||8|
|Published online||14 December 2018|
Increasing the strength of destroyed wood of wooden architecture monuments by surface modification
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: firstname.lastname@example.org
The Anglican Church in Arkhangelsk built in 1833 represents a wooden architecture monument. The article describes the strengthening of partially destroyed samples of the Anglican Church wood by surface modification. The first layer of the sandwich coating is nitrilotrimethylphosphonic acid, which forms covalent bonds with the substrate, partially strengthening the wood. The second layer is an epoxy resin solution, which forms covalent bonds with the coating of the first layer, with hydroxyl groups of the first layer involved in the curing of the second layer as well. A two-layer surface coating is formed, while the strength of the wood increases by 2 – 2.5 times, water absorption decreases by 3 times, and mass loss in combustion is no more than 9% according to GOST 27484-87. The monument preservation increases.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.