MATEC Web Conf.
Volume 245, 2018International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2018)
|Number of page(s)||7|
|Section||Sustainable Development of Arctic Region|
|Published online||05 December 2018|
Simulation of the rotary-screw vehicle motion on snow
Nizhny Novgorod State Technical University, 603950 N.Novgorod, Minin st., 24, Russia
2 Bauman Moscow State Technical University, 105005 Moscow, Baumanskaya 2-ya, 5, Russia
* Corresponding author: email@example.com
The article presents the determination of oscillation parameters of the rotor-screw vehicle during motion on rough terrain. The study presented the dynamics of off-road vehicle movement. The dependence of the vehicle vibration characteristics on the mover geometry and suspension parameters was found. The experiment with the vehicle was performed. Analysis of the research results allows to conclude that the use of the suspension increases speed of the rotary-screw vehicle by 1.5 - 2.5 times. The developed model and obtained results will be useful in design of all-terrain vehicles.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.