Issue |
MATEC Web Conf.
Volume 245, 2018
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2018)
|
|
---|---|---|
Article Number | 09011 | |
Number of page(s) | 8 | |
Section | Fluid Mechanics | |
DOI | https://doi.org/10.1051/matecconf/201824509011 | |
Published online | 05 December 2018 |
Verification of the CFD calculation for the centrifugal compressor medium flow model stages with the help of supercomputer
Peter the Great St. Petersburg Polytechnic University, 29 Polytechnicheskaya street, Saint-Petersburg, 195251, Russian Federation
* Corresponding author: lyubov5reshet@gmail.com
The goal of this work is to develop recommendations for the calculating problem formulation of the medium flow centrifugal compressor characteristics by computational fluid dynamics methods with the assessment of the computing resources necessary costs. Calculations are made on supercomputers of SPbPU “Polytechnic” and “DeltaCluster”. The object of the research is the centrifugal compressor stage for which the flow investigation has been held in the whole passage. The calculations result comparison with the practical experiment data for the whole working characteristics are shown in this work. The leakage in the lap seals and between the disks gaps investigation work has been made. The calculation of the whole 2π flat pattern has been made and also the influence on the calculation results of the between mesh interfaces has been analyzed.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.