Issue |
MATEC Web Conf.
Volume 245, 2018
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2018)
|
|
---|---|---|
Article Number | 07004 | |
Number of page(s) | 8 | |
Section | Engineering Nets and Equipment | |
DOI | https://doi.org/10.1051/matecconf/201824507004 | |
Published online | 05 December 2018 |
Centralized hot tap water systems calculation’s specifics
1
Riga Technical University, 6B/6A Kipslas St., Riga, Latvia
2
Peter the Great St. Petersburg Polytechnic University, Polytechnicheskaya 29, St. Petersburg, 195251, Russian Federation
* Corresponding author: i.i.dmitriev@yandex.ru
Most of the urban housing stock in Latvia as well as in major part of EU cities is apartment multi-storey buildings, most of which have a connection to centralized hot tap water systems. Also, such buildings as dormitories, university campuses, sporting facilities, mostly are connected to the centralized hot tap water systems. The hot tap water systems can have different optional technical solutions, such as recirculation loop, bath towels warmers, etc. All these options affect calculation’s specifics of the systems. The main challenge for designers is to make correct estimation of hydraulic losses, definition of necessary water flow rate and to choose such technical equipment as circulation pumps, balancing valves and circulation water flow. The main parameters directly affecting the sizing of hot tap water system are the number of inhabitants, designed water consumption, consumption uncertainty coefficient, building’s specifics etc. This study is based on the hot water consumption analysis in building were online monitoring system was installed.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.