| Issue |
MATEC Web Conf.
Volume 245, 2018
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2018)
|
|
|---|---|---|
| Article Number | 03019 | |
| Number of page(s) | 9 | |
| Section | Building Materials and Products | |
| DOI | https://doi.org/10.1051/matecconf/201824503019 | |
| Published online | 05 December 2018 | |
Amorphous fiber based on the Fe-B-C molten system for bulk reinforcement of concrete
Peter the Great St. Petersburg Polytechnic University, Polytechnicheskaya 29, St. Petersburg, 195251, Russian Federation
* Corresponding author: yasmin1010@yandex.ru
The article deals with the use of amorphous fiber of the Fe-B-C system, which was obtained by spinning the melt. Comparative tests of the samples made on the basis of the test material on the compressive strength and tensile strength of the traditional destructive method were made. The conductivity of the samples was also tested. Physical and mechanical characteristics of the material are obtained.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.