Issue |
MATEC Web Conf.
Volume 245, 2018
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2018)
|
|
---|---|---|
Article Number | 03006 | |
Number of page(s) | 5 | |
Section | Building Materials and Products | |
DOI | https://doi.org/10.1051/matecconf/201824503006 | |
Published online | 05 December 2018 |
Fine-grained concrete with combined reinforcement by different types of fibers
1
Belgorod State Technological University named after V.G. Shukhov, Belgorod, 308012, Russian Federation
2
Peter the Great St.Petersburg Polytechnic University, St. Petersburg, 195251, Russian Federation
* Corresponding author: klyuyev@yandex.ru
The article deals with the application of combined reinforcement of fi-ne-grained concrete with steel wave and polypropylene fibers. High-density packaging of the mixture components was used to improve the strength and deformation characteristics. In order to reduce the cost of fibre concrete, composite binders were developed. Rational selection of filler and the use of a steel wave fiber gave the opportunity to get the fibre concrete with tensile compressive strength – 84.8 MPa, the tensile strength in bending – 19.8 MPa on technogenic sands of the Kursk Magnetic Anomaly. With combined reinforcement by steel and polypropylene fiber on technogenic sands of the Kursk magnetic anomaly fibre concrete with a tensile compressive strength – 82.8 MPa, in bending – 19.1 MPa was developed. With the same strength charac-teristics the developed mixture of fibre concrete based on combined re-inforcement due to reducing the amount of steel fiber at cost is lower by 25% compared to the composition on steel fiber and the same com-posite binder.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.