Issue |
MATEC Web Conf.
Volume 149, 2018
2nd International Congress on Materials & Structural Stability (CMSS-2017)
|
|
---|---|---|
Article Number | 02086 | |
Number of page(s) | 6 | |
Section | Session 2 : Structures & Stability | |
DOI | https://doi.org/10.1051/matecconf/201814902086 | |
Published online | 14 February 2018 |
Underground Cemented Backfill, a Design Procedure for an Integrated Mining Waste Management.
Mohamed V University, Mohammadia Engineering School, Department of Mineral Engineering, 3GIE Laboratory, Rabat, Morocco.
From several case studies around the world, it is well known that the binder represents the major part of backfilling operation cost. Therefore, in the case of Imiter operation, research were mainly focused on the optimization of binder content. To this end, the definition of the physical and chemical properties of the future formula ingredients, specifically: tailings, waste material and hydraulic binder, was necessary. Analytical verifications were conducted to predict the UCB mechanical strength according to the defined underground functions and delivery network. Experimental testing, including: uniaxial compression, Immediate Bearing Index (IBI) and slump test, were then conducted to evaluate the possibility of reaching the required strength with the selected materials. The obtained results show that the tailings and mining wastes can be used as backfilling material with a specific binder content depending on each underground application. The followed approach can be applied for a prefeasibility evaluation for a backfilling facility.
Key words: underground mining / waste management / cemented backfill / design optimization
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.