| Issue |
MATEC Web Conf.
Volume 146, 2018
9th International Scientific Conference Building Defects (Building Defects 2017)
|
|
|---|---|---|
| Article Number | 03002 | |
| Number of page(s) | 6 | |
| Section | Building Design and Technology | |
| DOI | https://doi.org/10.1051/matecconf/201814603002 | |
| Published online | 22 January 2018 | |
Design without thermal bridges
1 URFU, Department of Civil Engineering, 620002 Yekaterinburg, Russia
2 Institute of Passive house, Production Department, 117405 Moscow, Russia
* Corresponding author: i.n.maltceva@urfu.ru
The main focus of the article is on the quality design and implementation of the thermal insulation of buildings. Shells of buildings consist not only of conventional structures (wall, roof, ceiling), but also of edges, corners, joints and places of disruption of the outer thermal insulation shell integrity (due to through passage of pipelines, ventilation ducts and etc.). In all these places, heat losses are generally increased in comparison with conventional surfaces. Some of them are easily taken into account by calculation, using a special method proposed by the authors. Other thermal bridges due to unfavorable structural details can be avoided by observing the rules and recommendations that are classified and discussed in detail in this article.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.