| Issue |
MATEC Web Conf.
Volume 145, 2018
NCTAM 2017 – 13th National Congress on Theoretical and Applied Mechanics
|
|
|---|---|---|
| Article Number | 05006 | |
| Number of page(s) | 7 | |
| Section | Non-destructive testing | |
| DOI | https://doi.org/10.1051/matecconf/201814505006 | |
| Published online | 09 January 2018 | |
High-speed deformation of copper samples with the use of magnetic pulse method
1
Peter the Great Saint-Petersburg Polytechnic University, 195251 Saint-Petersburg, Russia
* Corresponding author: ksi.mgd@gmail.com
The possibility of using the magnetic pulse method for studying the high-speed deformation modes of metals with strain rates up to 100,000 1/s without a preliminary phase of material compression under loading in the microsecond range of durations is shown. 3D calculation of the magnetic field and deformation modes has shown the possibility of creating loading schemes that are free of induced currents in the sample in the zone of maximum mechanical stresses. The first experiments show the need for verification of the Jones-Cook model at high deformation rates.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.