| Issue |
MATEC Web Conf.
Volume 143, 2018
IV International Young Researchers Conference “Youth, Science, Solutions: Ideas and Prospects” (YSSIP-2017)
|
|
|---|---|---|
| Article Number | 02013 | |
| Number of page(s) | 8 | |
| Section | Building Materials | |
| DOI | https://doi.org/10.1051/matecconf/201814302013 | |
| Published online | 08 January 2018 | |
Mortars for 3D printing
Tomsk State University of Architecture and Building, 634003 Tomsk, Russia
* Corresponding author: demyanenko.olga.v@gmail.com
The paper is aimed at developing scientifically proven compositions of mortars for 3D printing modified by a peat-based admixture with improved operational characteristics. The paper outlines the results of experimental research on hardened cement paste and concrete mixture with the use of modifying admixture MT-600 (thermally modified peat). It is found that strength of hardened cement paste increases at early age when using finely dispersed admixtures, which is the key factor for formation of construction and technical specifications of concrete for 3D printing technologies. The composition of new formations of hardened cement paste modified by MT-600 admixture were obtained, which enabled to suggest the possibility of their physico-chemical interaction while hardening.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.