Issue |
MATEC Web Conf.
Volume 143, 2018
IV International Young Researchers Conference “Youth, Science, Solutions: Ideas and Prospects” (YSSIP-2017)
|
|
---|---|---|
Article Number | 02003 | |
Number of page(s) | 7 | |
Section | Building Materials | |
DOI | https://doi.org/10.1051/matecconf/201814302003 | |
Published online | 08 January 2018 |
Macromodel of interfacial transition layer in ceramic matrix composites
1
Siberian State Industrial University, 654007 Novokuznetsk, Russia
2
National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
* Corresponding author: stanyr@list.ru
The purpose of the study is to create a macromodel of interfacial transition layer in ceramic matrix composites. Chemical and mineralogical compositions were investigated by means of X-ray fluorescence analysis and X-ray diffractometry, ceramic and technological properties of raw materials were defined using standard test methods for argillaceous raw materials. Phase composition and structure of ceramic specimens were studied using a complex of modern physico-chemical analysis methods. The layer-by-layer model of shell-core transition in ceramic matrix material was suggested. Boundary conditions for obtaining specimens were defined in terms of number of layers, thickness of such layers and pitch of core-to-shell material ratio. Forced air supply was organized while burning for directed heat and mass transfer inside the specimens. Mineral composition of layers was defined for ceramic specimens with the core of iron ore waste and the shell of clay. The study enabled to determine dependences between qualitative and semi-quantitative variation of new mineral formations content in transitional layers of a composite, which is the evidence of interaction between the core and the shell products while burning a ceramic matrix material.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.