| Issue |
MATEC Web Conf.
Volume 142, 2018
International Conference on Materials Applications and Engineering 2017 (ICMAE2017)
|
|
|---|---|---|
| Article Number | 01007 | |
| Number of page(s) | 5 | |
| Section | Chemical Materials and Chemical Syntheses | |
| DOI | https://doi.org/10.1051/matecconf/201814201007 | |
| Published online | 08 January 2018 | |
Failure Analysis of Cathode Materials for Energy Storage Batteries in Overcharge Test
1
Institute of Industrial and Consumer Product Safety, Chinese Academy of Inspection and
Quarantine, Beijing Petrochemical Engineering Co., Ltd., Beijing, China
2
Inspection & Quarantine Technology Center of Guangdong Entry-Exit Inspection & Quarantine Bureau of P. R. China, Room 812, Tower B, No.66 Huacheng Avenue, Guangzhou, Guangdong Province, China
* Corresponding author: author@email.org
The micro-analysis of energy storage batteries in overcharge test at 20°C temperature was investigated. The results showed as follows: (1) Compared with the normal battery charge at room temperature scanning microscope maps of battery overcharge, the crystal was fractured of the positive surface when the battery was overcharging, and with the increase of experimental time, the crystal fracture is more serious, this is to say that the battery electrolyte decomposition or battery material structure could change by overcharge test. (2) Based on the XRD maps, the characteristic peak position of overcharge test of cathode materials were changed, this showed that the content of cathode material elemental has been destroyed and changed in overcharge test.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.