| Issue |
MATEC Web Conf.
Volume 139, 2017
2017 3rd International Conference on Mechanical, Electronic and Information Technology Engineering (ICMITE 2017)
|
|
|---|---|---|
| Article Number | 00214 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/matecconf/201713900214 | |
| Published online | 05 December 2017 | |
Analysis of dynamic meshing characteristic of planetary gear transmission in wind power increasing gearbox
1 School of Mechanotronics & Vehicle Engineering, East China Jiaotong University, Nanchang 330013, China
2 School of Basic Science, East China Jiaotong University, Nanchang 330013, China
* Corresponding author: sduhys@163.com
Dynamic behavior of planetary gear’s tooth contact surface in the different location can better conform operation condition comparing to the general gear pair. Nonlinear finite element algorithm was derived according to the basic control equation of contact dynamics. A finite element model of planetary gear transmission in wind power increasing gearbox was proposed considering different meshing locations based on nonlinear finite element solution. The characteristics of stress distribution at different meshing positions were analyzed. A simulation of the meshing process was conducted using finite element analysis. It was shown that node stresses of external meshing planetary gear varied significantly at different position. The analysis provides some useful insights into the performance of planetary gear’s tooth contact surface.
Key words: Equivalent stress / planetary gear / finite element analysis / analysis of stress distribution
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.