Issue |
MATEC Web Conf.
Volume 139, 2017
2017 3rd International Conference on Mechanical, Electronic and Information Technology Engineering (ICMITE 2017)
|
|
---|---|---|
Article Number | 00075 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/matecconf/201713900075 | |
Published online | 05 December 2017 |
Random demodulation for structural health monitoring excited by the five-cycle sine burst
1 School of Aerospace Engineering, Xiamen University, Xiamen 361005, China
* Corresponding author: 476984750@qq.com
* Corresponding author: 458202237@qq.com
Nowadays, the Structural Health Monitoring (SHM) has been paid more and more attention. The five-cycle sine burst is widely used as the exciting signal in SHM and the sensors’ responded signals are analyzed to research the damage. In the sensor network, there will be many sensors which mean many responded signals will be sampled, restored and sometimes transferred. In the traditional way which is known as Nyquist sampling theorem, the sampling rate must be more than twice the highest rate of the original signal. In this way, the amount of data will be huge. As the result, the costs will be very expensive and the equipment may be huge and heavy, which is especially unaccepted in the aircraft. It is necessary to do some research to compress the signal. The Compressing Sensing (CS) theory provides new methods to compress the signals. The Random Demodulation (RD) is a specific method which can accomplish the physical implementation of CS theory. In this paper, according to the structure of RD, we chose some chips to build a RD system. And we did some experiments to verify the method through the system. We chose the Orthogonal Matching Pursuit (OMP) as the construct algorithm to recover the signal.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.