Issue |
MATEC Web Conf.
Volume 139, 2017
2017 3rd International Conference on Mechanical, Electronic and Information Technology Engineering (ICMITE 2017)
|
|
---|---|---|
Article Number | 00053 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/matecconf/201713900053 | |
Published online | 05 December 2017 |
An approved frequency tracking method in connected element interferometry
1 Department of Optical and Electronic Equipment, Aerospace Engineering University, Beijing, 101416, PR China
* Corresponding author: zqaniu@163.com
Carrier tracking loop is a basic method of frequency tracking in CEI (connected element interferometry), but the tracking error is very large or even worse at high dynamic. To solve this problem, a frequency tracking method assisted by open loop frequency estimation is proposed in this paper. First, an open-loop frequency estimation algorithm is used to estimate the frequency of signals at different moments, then, the least squares fitting method is used to estimate the corresponding dynamic parameters of different orders. Next, a local signal is generated to compensate the received signal. After eliminating most of the dynamic characteristics, the signal is fed into PLL (Frequency locked loop) and high-precision frequency tracking results can be obtained. Simulation results show that, in the condition of low SNR, the new method has higher accuracy than the method assisted by FLL (Frequency locked loop), and the processing time is shorter. When there is a two order Doppler frequency change, the open-loop assisted method can overcome the steady phase error of the PLL, and is of great significance in the applications of connected elements interferometry.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.