| Issue |
MATEC Web Conf.
Volume 134, 2017
18th International Scientific Conference - LOGI 2017
|
|
|---|---|---|
| Article Number | 00012 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/matecconf/201713400012 | |
| Published online | 08 November 2017 | |
Analysis of the Utilization of Machinery in the Production Process Using Computer Simulation
1 Technical University of Košice, BERG Faculty, Logistics Department, Park Komenského 14, 040 01 Košice, Slovakia
2 Technical University of Ostrava, Centre ENET, 17. listopadu 15, 708 33 Ostrava-Poruba, Czech Republic
* Corresponding author: gabriel.fedorko@tuke.sk
For the efficient operation of each production process, individual machines and equipment must be used in the maximal possible measure. For this reason, it is necessary to know their utilization and to take measures to ensure their effective use. For performing such an analysis and to design subsequent measures, the use of the computer simulation method is very effective, e.g. simulation in Tecnomatix Plant Simulation program.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.