| Issue |
MATEC Web Conf.
Volume 128, 2017
2017 International Conference on Electronic Information Technology and Computer Engineering (EITCE 2017)
|
|
|---|---|---|
| Article Number | 03005 | |
| Number of page(s) | 4 | |
| Section | Electronic Material | |
| DOI | https://doi.org/10.1051/matecconf/201712803005 | |
| Published online | 25 October 2017 | |
Thermal Properties of Buckypaper Enabled Polymer Composites
1
Harbin University, 150086 Harbin, China
2
Harbin Institute of Technology, 150001 Harbin, China
a Corresponding author: zaying@sina.com
The heating process of the polymer composite reinforced by buckypaper was simulated with the finite element model. FLUENT was used to analyze how the thickness of buckypaper affect the temperature distribution, the changes of the temperature with time and the heating rate during heating. The maximum and average temperature of the composites decrease when the thickness of the buckypaper increase, whereas the minimum temperature on the samples have the opposite trend. The heating rate of the average temperature of the composites reinforced by the buckypaper with the thickness of 1.2 mm is faster than those of 0.4 mm and 0.8 mm. The temperature distribution of the polymer composites reinforced by the buckypaper is more uniform as the thickness of the buckypaper increase.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.