MATEC Web Conf.
Volume 123, 20172017 The 2nd International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2017)
|Number of page(s)||6|
|Published online||21 September 2017|
Effects of elastic ball and coating on pure squeeze EHL motion for constant load with couple stresses using FDM method
1 Department of Applied Science/Interdisciplinary Program of Green and Information Technology, National Taitung University, Taitung City, 95092, Taiwan, R.O.C.
2 Department of Mechanical Engineering, Kun Shan University, Tainan City, 71070, Taiwan, R.O.C.
3 Department of Mechanical Engineering, Nanya Institute of Technology, Taoyuan City, 32091, Taiwan, R.O.C.
* e-mail: email@example.com
In this paper, an elastic sphere approaching a lubricated elastic coating surface with couple stress lubricant is explored under constant load condition. The finite difference method (FDM), Gaussian elimination, and Gauss-Seidel iteration method are used to solve the transient modified Reynolds equation with its boundary condition, the elasticity deformation equations of ball and coating layer, load balance equation, and lubricant rheology equations simultaneously. The transient pressure profiles, film shapes, and elastic deformation during the pure squeeze process under various operating conditions in the elastohydrodynamic lubrication (EHL) regime are discussed.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.