| Issue |
MATEC Web Conf.
Volume 117, 2017
RSP 2017 – XXVI R-S-P Seminar 2017 Theoretical Foundation of Civil Engineering
|
|
|---|---|---|
| Article Number | 00105 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/matecconf/201711700105 | |
| Published online | 24 July 2017 | |
Effects of Forces Applied in the Middle Plane on Bending of Medium-Thickness Band
Moscow state university of civil engineering, Yaroslavskoye shosse, 26, Moscow, Russia, 129337
* Corresponding author: LeontievAN@mgsu.ru
This paper examines the problem of calculating a plate of medium thickness uploaded by transverse loads and forces in the middle plane. We use variant equations from the theory of medium thickness plates as inputs, as proposed by B.F. Vlasov. The paper also considers the presence of tensile or compressive forces in the plane of the plate. The paper offers an example of calculation for a semi-infinite uploaded at the end of the transverse load and pivotally supported on the longitudinal edges. It is demonstrated that in the middle plane, the forces significantly influence the plate’s deflections and bending forces. There are material differences between results obtained with the theory of plates of medium thickness and those of the classical the theory of bending of plates.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.