| Issue |
MATEC Web Conf.
Volume 114, 2017
2017 International Conference on Mechanical, Material and Aerospace Engineering (2MAE 2017)
|
|
|---|---|---|
| Article Number | 03015 | |
| Number of page(s) | 6 | |
| Section | Chapter 3: Aerospace | |
| DOI | https://doi.org/10.1051/matecconf/201711403015 | |
| Published online | 10 July 2017 | |
Research and Simulation on Division Attack Airspace
ATC and Navigation collage, Air Force Engineering University, Xi’an Shanxi 710051, China
a Corresponding author: 347741625@qq.com
Division attack is the basic tactical action of air strike operation carried out by the Air Force. The aircraft tactical action model is analyzed and established according to the Division attack pattern. Track points are determined on the basis of parameters of the weapons, and the ideal trajectory is determined under the constraint of the flights’ ideal parameters and the type of target. The upper winds and pilot’ operating error are taken into account on the ideal track, and the total deviation is calculated. We put forward a method of establishing airspace based on the probability deviation of the attack track, and adopt the relevant flight data to carry on the simulation verification. The final results show that the effectiveness and practicability of this method, and it is helpful for the rapid generation of relevant airspace.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.