| Issue |
MATEC Web Conf.
Volume 113, 2017
12th International Scientific-Technical Conference on Electromechanics and Robotics “Zavalishin’s Readings” - 2017
|
|
|---|---|---|
| Article Number | 01002 | |
| Number of page(s) | 4 | |
| Section | Electromechanics and Electric Power Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201711301002 | |
| Published online | 20 June 2017 | |
The research of heating efficiency of different induction heating systems
1 Ufa State Petroleum Technological University, 450062 Ufa, Russia
2 Gazprom dobycha Yamburg, 629306, New Urengoy, Russia
* Corresponding author: khazievart@mail.ru
Computer models of tape and coil inductors are described, and a comparison of the heating efficiency depending on various parameters is made. The developed computer model was made in the ELCUT 6.0. As a result of the simulation, data on the heating characteristics (depending on the various parameters of the heating elements) are obtained. The average statistical data of a series of experiments with a tape inductor are given. It is shown that for the same parameters (values of inductance and number of wires), the tape version inductor heats up a pipe to a higher temperature (by 5.08%) than the inductor in the coil version in 10 minutes.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.