| Issue |
MATEC Web Conf.
Volume 112, 2017
21st Innovative Manufacturing Engineering & Energy International Conference – IManE&E 2017
|
|
|---|---|---|
| Article Number | 01020 | |
| Number of page(s) | 6 | |
| Section | Advanced Machining and Surface Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201711201020 | |
| Published online | 03 July 2017 | |
Aspects concerning the circularity and cylindricity deviation of a work piece processed by turning
1 Machine Manufacturing Department, Machine Manufacturing and Industrial Management Faculty, Gheorghe Asachi Technical University, D. Mangeron Blvd, No. 59A, Iaşi, România
2 Machine Tools and Production Systems Department, Machine Manufacturing and Industrial Management Faculty, Gheorghe Asachi Technical University, D. Mangeron Blvd, No. 59A, Iaşi, România
* Corresponding author: mihaitzaboca@yahoo.com
All the cutting processes impose certain specifications for the work pieces obtained. In such conditions, the parameters as tolerance, roughness and geometrical deviations must be well known in order to determine the obtained accuracy of the processed work pieces. During the cutting process, due to some influences from the MTDW (Machine Tool, Device Work piece), a work piece can result with processing errors. In order to compensate this errors or, if it is possible to eliminate them, some measurement of the work piece dimensions are taken. In this way, the present study propose an evaluation of such aspects in order to establish, based on the work piece shape on radial and longitudinal direction, the imposed measures to compensate the processing errors. For high accuracy of the obtained data, an automated device will be used. The results will highlight the influenced areas of the processed work pieces and the possible factors which conduct to generating errors.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.