MATEC Web Conf.
Volume 110, 2017International Youth Scientific Conference “Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment” (HMTTSC 2017)
|Number of page(s)||5|
|Published online||19 June 2017|
Numerical research of the perforation of targets by ice impactors at different temperatures
National Research Tomsk State University, 634050 Tomsk, Russia
* Corresponding author: firstname.lastname@example.org
In the present work, the process of interaction of ice impactors of spherical shape with targets of aluminum alloy and asbotextolite has been numerically investigated. The initial temperature of the impactors was set from 0 to 500° C. The speed of the impactors was set in the range from 500 m/s to 1500 m/s. The behavior of the medium was described from the general positions of the mechanics of continuous media and corresponded to modern concepts of the destruction of solids under load. The material was considered as isotropic, elastoplastic, compressible, porous medium. The equation of state is chosen in the Walsh form. The problem was solved in a two-dimensional formulation for the case of axial symmetry. The calculations were carried out using the Lagrangian technique of computer simulation, which takes into account the fragmentation of the material in shear and shear failure. The current configurations of the impactor-target and the velocity of the leading fragments are obtained when penetrating the targets.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.