MATEC Web Conf.
Volume 72, 2016Heat and Mass Transfer in the System of Thermal Modes of Energy – Technical and Technological Equipment (HMTTSC-2016)
|Number of page(s)||5|
|Published online||09 August 2016|
Modeling of High Energy Impact on Ice in Taking into Account the Temperature
National Research Tomsk State University, 634050 Tomsk, Russia
* Corresponding author: firstname.lastname@example.org
In this paper, the problems deep penetration of compact impactors into the ice, taking into account different temperatures were solved. The behavior of ice is described by the basic system equations of continuum mechanics, i.e., the equations of continuity, momentum and energy in the lagrangian approach. Medium are compressible, isotropic, no mass forces, internal sources of heat and thermal conductivity. Medium also includethe shockwave phenomena, as well as formation “spall” and “shear” damage. The stress tensor is divided into deviatoric and spherical components. Equation of statewas chosen in the form of Walsh. The components of the stress tensor deviator located on the elasticplastic flow model based on the equations of Prandtl-Reis associated with von Mises yield criterion. Initial impactor velosity was varied atfrom 50 to 325 m/s. Numerical simulation results showed the influence of temperature of the ice to the depth of penetration of the impactors.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.