Issue |
MATEC Web Conf.
Volume 101, 2017
Sriwijaya International Conference on Engineering, Science and Technology (SICEST 2016)
|
|
---|---|---|
Article Number | 02011 | |
Number of page(s) | 6 | |
Section | Emerging Concepts in Chemical Process & Energy Engineering | |
DOI | https://doi.org/10.1051/matecconf/201710102011 | |
Published online | 09 March 2017 |
The effect of pretreatment using sodium hydroxide and acetic acid to biogas production from rice straw waste
1 Department of Chemical Engineering, Diponegoro University, 50275 Semarang, Indonesia
2 Department of Environmental Engineering, Diponegoro University, 50275 Semarang, Indonesia
* Corresponding author: budiyono@che.undip.ac.id
Rice straw is agricultural waste containing high potency to be treated to biogas. However, the usage of rice straw is still limited due to high lignin content that will cause low biodegradability. The aim of this research was to study the effect of pretreatment using NaOH and acetic acid to biogas production from rice straw. NaOH was varied from 2%w, 4%w, and 6%w; and acetic acid was varied from 0,075 M, 0,15 M dan 0,75 M. The rice straw was cut into 1 cm size and submerged for 30 minutes in NaOH and acetic acid solution. The rice straw then filtered and neutralized before sending to anaerobic digestion process using rumen fluid bacteria. Biogas produced was measured using water displacement method. The result showed that the optimum concentration of NaOH solution was 4%w that resulted in biogas volume of 21,1 ml/gTS. Meanwhile, the optimum concentration of acetic acid pretreatment was 0,075 M that produced biogas volume of 14,5 ml/gTS. These results suggest that pretreatment using NaOH solution is more effective for decreasing the lignin content from rice straw.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.