Issue |
MATEC Web Conf.
Volume 77, 2016
2016 3rd International Conference on Mechanics and Mechatronics Research (ICMMR 2016)
|
|
---|---|---|
Article Number | 03004 | |
Number of page(s) | 6 | |
Section | Study on Mechanics | |
DOI | https://doi.org/10.1051/matecconf/20167703004 | |
Published online | 03 October 2016 |
Hydrodynamics of Biomass Gasification in a Dual Chamber Circulating Fluidized Bed Reactor
Research Centre for Physics, Indonesian Institute of Sciences - Lembaga Ilmu Pengetahuan Indonesia, Kompleks LIPI, Jln. Sangkuriang 21/154D, Bandung 40135 - Indonesia
Research Centre for Electric Power and Mechatronics, Indonesian Institute of Sciences - Lembaga Ilmu Pengetahuan Indonesia, Kompleks LIPI, Jln. Sangkuriang 21/154D, Bandung 40135 - Indonesia
This paper presents work on hydrodynamics of several types of biomass mixture in a dual chamber circulating fluidized bed. In designing the CFBreactornecessary to know the distribution of solid particles radially and axially influenced by fluidizing gas velocity, particle size, solid circulation flux, reactor diameter and height of the reactor. These factors will affect pressure drop along the riser of the reaction chamber. Pressure drop is an important factor in the study of hydrodynamics of particle flow. The pressure drop was measured using mathematical model compared to experimental results done on a cold mode. Since it was found that both results were consistent which means that the model can be used to predict the operating parameters of CFB design.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.