| Issue |
MATEC Web Conf.
Volume 72, 2016
Heat and Mass Transfer in the System of Thermal Modes of Energy – Technical and Technological Equipment (HMTTSC-2016)
|
|
|---|---|---|
| Article Number | 01104 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/matecconf/20167201104 | |
| Published online | 09 August 2016 | |
Effect of Oxidizing Medium on Synthesis Gas Content at Solid Fuel Gasification
1 National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
2 National Research Tomsk State University, 634050 Tomsk, Russia
* Corresponding author: korotkikh@tpu.ru
Solid fuel gasification is promising technology in sphere of clean energy. The synthesis gas content for air-blown fixed bed gasification may be defined using Gibbs free energy minimization procedure. The minimization procedure was realized via steepest descent method. The feed consisted of steam, air and coal at standard conditions. The temperature and gas content were calculated at different ratios of coal/steam/air. It was found that optimal syngas content resulted at component ratio of 1.0/0.5/2.2 with the ambient temperature of 1300 K and syngas heating power of 7.7 kJ/m3.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.