Issue |
MATEC Web Conf.
Volume 110, 2017
International Youth Scientific Conference “Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment” (HMTTSC 2017)
|
|
---|---|---|
Article Number | 01005 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/matecconf/201711001005 | |
Published online | 19 June 2017 |
Influence of thermal and mass transfer, the properties of steam-oxygen oxidizer and structure of coke on the composition of the generating synthesis-gas at the gasification of fuel
National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
* Corresponding author: subbot@tpu.ru
A mathematical model of the solid fuel conversion process which is used to analyze the synthesis-gas that is the result of coke gasification is proposed. During the conversation of coke in an environment of high-temperature water vapor, synthesis-gas consisting of hydrogen, oxide and carbon dioxide is obtained. That is shown in the article. Hydrogen in the produced gas at any oxidizer temperatures is always over 50% of total volume. The ratio of oxide and carbon dioxide depends on the temperature of the oxidant. The lower the oxidant temperature, the greater the proportion of carbon monoxide. It is established that it is economically more advantageous to use water vapor with the addition of oxygen as an oxidizer in the gasification of fuel. With the use of such an oxidizer, synthesis-gas consisting of 100% of the combustion gas is obtained. The temperature of the steam-oxygen oxidant after the fuel has ignited can be significantly reduced practically before the beginning of the process of vapor condensation. The synthesis-gas produced in this gasification process will contain in volume proportions about 25% hydrogen and 75% carbon monoxide.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.