MATEC Web Conf.
Volume 72, 2016Heat and Mass Transfer in the System of Thermal Modes of Energy – Technical and Technological Equipment (HMTTSC-2016)
|Number of page(s)||6|
|Published online||09 August 2016|
An Experimental Procedure to Estimate Lifetime of Water Drop with Graphite Inclusion under Intensive Vaporization with Explosive Breakup
National Research Tomsk Polytechnic University, Tomsk, Russia
* Corresponding author: firstname.lastname@example.org
We developed an experimental setup equipped with tube furnace for continuous heating of heterogeneous drops at a constant temperature and high-speed camera to study characteristics of phase transitions at interfaces of these drops. Also, an experimental procedure was proposed to estimate time characteristics of processes occurring when heated heterogeneous drops in high-temperature environment. As an example, at temperature of heating of 1373 K, lifetime of 15 μl water drop with 1 mm solid inclusion made of natural graphite in high-temperature environment equals almost to 1 s. Experimental data also enabled to reveal minimum temperature at which intensive vaporization of 5 μl, 10 μl and 15 μl drops with inclusions in size of 2×2×2 mm proceeds with explosive breakup. This temperature equals to 803 ± 10 K depending on initial water volume in heterogeneous drops.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.