Issue |
MATEC Web Conf.
Volume 67, 2016
International Symposium on Materials Application and Engineering (SMAE 2016)
|
|
---|---|---|
Article Number | 07039 | |
Number of page(s) | 7 | |
Section | Chapter 7 Materials Application and Engineering | |
DOI | https://doi.org/10.1051/matecconf/20166707039 | |
Published online | 29 July 2016 |
Effect of Temperature on the Galvanic Corrosion of Cu-Ni Alloy/High Strength Steel in Seawater
1 College of Aerospace and Civil Engineering, Harbin Engineering University, Harbin, China
2 state key laboratory for marine corrosion and protection, luoyang ship materials research institute Xiameng, China
a spring555555@126.com
b wujh@sunrui.net
c 348410679@qq.com
* Corresponding author: spring555555@126.com
The galvanic corrosion behavior of Cu-Ni Alloy(B10)/high strength steel (921A) has been studied using a zero-resistance ammeter (ZRA) in seawater at different temperatures. As well as it was systemically investigated by weight loss measurements, electrochemical methods and scanning electron microscope.Results showed 921A acts as the anode and B10 act as the cathodes. The effect of temperature on the galvanic corrosion is important, the corrosion rate became higher with the temperature increased.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.