Issue |
MATEC Web Conf.
Volume 67, 2016
International Symposium on Materials Application and Engineering (SMAE 2016)
|
|
---|---|---|
Article Number | 07025 | |
Number of page(s) | 6 | |
Section | Chapter 7 Materials Application and Engineering | |
DOI | https://doi.org/10.1051/matecconf/20166707025 | |
Published online | 29 July 2016 |
Lightweight Brick by Carbon Ash from The Mixed Plastic Waste Treatment Plant
Department of Electrical Engineering, Da-Yeh University, 168 University Rd, Dacun, Changhua, 51591, Taiwan(R.O.C.)
* Corresponding author: aa5433.zkhn@gmail.com
This study was designed to investigate the mixed plastic waste from the production of light carbon ash bricks performance. The mixed waste plastic pyrolysis process generated waste - Carbon ash. After extrusion, a Lightweight brick was made by carbon ash, additive and Cement mortar. In general, the set compressive strength and insulation effect of lightweight bricks with carbon ash proportion for significant impact. The set water absorption and thermal conductivity of lightweight bricks with carbon ash proportion for significant impact. The set density of lightweight brick ameliorates with M3824 additive and CM3 cement mortar for significant impact. Under conditions of technology and economic, the results of this study as reference for market-oriented marketing and commercialization of production.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.