| Issue |
MATEC Web Conf.
Volume 63, 2016
2016 International Conference on Mechatronics, Manufacturing and Materials Engineering (MMME 2016)
|
|
|---|---|---|
| Article Number | 02042 | |
| Number of page(s) | 4 | |
| Section | Manufacturing and Design Science | |
| DOI | https://doi.org/10.1051/matecconf/20166302042 | |
| Published online | 12 July 2016 | |
Simulation Process Analysis of Rubber Shock Absorber for Machine Tool
1 College of Mechanical Engineering, Xi’an University of Science and Technology, Xi’an 710054 PR China
2 Department of Mechanical Engineering, Xi’an Jiaotong University, Xi’an 710049 PR China
a Corresponding author: wuhy@mail.xjtu.edu.cn
The simulation on rubber shock absorber of machine tool was studied. The simple material model of rubber was obtained by through the finite element analysis software ABAQUS. The compression speed and the hardness of rubber material were considered to obtain the deformation law of rubber shock absorber. The location of fatigue were confirmed from the simulation results. The results shown that the fatigue position is distributed in the corner of shock absorber. The degree of deformation is increased with increasing of compress speed, and the hardness of rubber material is proportional to deformation.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.