A Fault Estimation Method Based on UIO Robust Residual Generators
1 Air Defense and Antimissile Institute, Air Force Engineering University, Xi’an, 710051, China
2 The 302ed Institute of the Tenth Academy of China Aerospace Science & Industry Corporation ; Guiyang 550009, China
3 School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China
a Corresponding author: firstname.lastname@example.org
This paper proposed a fault estimation method based on robust residual generators for a linear system. A system with additive actuator or component faults was considered in the case where the number of the independent faults was larger than that of the independent measurements. This method was achieved based on UIO robust residual generators and there was no need to design extra fault estimators. In this method, fault estimation was achieved via three steps. First, codingsets, which describe the sensitivity relationship between faults and generators, are designed. Second, a bank of robust residual generators are designed according to the coding sets. Finally, fault estimation is achieved by using the result of fault isolation and the output of robust residual generators. A sufficient condition on the application of the method was given and the asymptotic convergence property of the estimation error by using the method was proved. Simulation results demonstrate the effectiveness of the method.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.