| Issue |
MATEC Web of Conferences
Volume 44, 2016
2016 International Conference on Electronic, Information and Computer Engineering
|
|
|---|---|---|
| Article Number | 02059 | |
| Number of page(s) | 4 | |
| Section | Electronics, Information and Engineering Application | |
| DOI | https://doi.org/10.1051/matecconf/20164402059 | |
| Published online | 08 March 2016 | |
Research on the application of active sound barriers for the transformer noise abatement
1
State Grid Hunan Electric Power Corporation Research Institute, 410007 Changsha, Hunan Province, China
2
Key Laboratory of Modern Acoustics, Institute of Acoustics, Nanjing University, 210093 Nanjing, Jiangsu Province, China
a Sheng Hu: hbhusheng@163.com
Sound barriers are a type of measure most commonly used in the noise abatement of transformers. In the noise abatement project of substations, the design of sound barriers is restrained by the portal frames which are used to hold up outgoing lines from the main transformers, which impacts the noise reduction effect. If active sound barriers are utilized in these places, the noise diffraction of sound barriers can be effectively reduced. At a 110kV Substation, an experiment using a 15-channel active sound barrier has been carried out. The result of the experiment shows that the mean noise reduction value (MNRV) of the noise measuring points at the substation boundary are 1.5 dB (A). The effect of the active noise control system is impacted by the layout of the active noise control system, the acoustic environment on site and the spectral characteristic of the target area.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.