| Issue |
MATEC Web of Conferences
Volume 35, 2015
2015 4th International Conference on Mechanics and Control Engineering (ICMCE 2015)
|
|
|---|---|---|
| Article Number | 02006 | |
| Number of page(s) | 5 | |
| Section | Mechanical engineering and control system | |
| DOI | https://doi.org/10.1051/matecconf/20153502006 | |
| Published online | 16 December 2015 | |
Application of focus-variation Technique in Measurements of Ultrasonic Vibrations of Grinding pins
Rzeszów University of Technology, al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland
a Corresponding author: rwdowik@prz.edu.pl
The paper presents the application of focus-variation technique in measurements of ultrasonic vibrations of grinding pins. Ultrasonic vibrations of tools are applied in ultrasonic assisted grinding. Their measurements are significant for development of this hybrid machining process. Alumina and zirconia ceramic materials in the final fired state were machined in experiments which are known as scratch tests. Diamond grinding pin was used as a tool to machine scratches. Marks of diamond grains, left on the surface of workpieces after machining process, were investigated using The Infinite Focus Real 3D optical microscope. Focus-variation is the principle of operation of this microscope. Investigations concerned possibilities of measurements of an amplitude of axial and radial vibrations in the case of two ceramic materials. Results of performed measurements are presented and discussed for selected machining parameters.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.