| Issue |
MATEC Web of Conferences
Volume 22, 2015
International Conference on Engineering Technology and Application (ICETA 2015)
|
|
|---|---|---|
| Article Number | 05015 | |
| Number of page(s) | 5 | |
| Section | Chemical and Industrial Technology | |
| DOI | https://doi.org/10.1051/matecconf/20152205015 | |
| Published online | 09 July 2015 | |
Simulation and Optimization of Strengthening the Gas-Liquid Mass Transfer Structure in Tray Column
College of Chemical Engineering, Qingdao University of Science and Technology, Qingdao, Shandong, China
* Corresponding author: ZZSLunWen@126.com
This paper presented the analysis of the effect of the mesh layers, installation height and opening rate on gas-liquid two-phase flow field by numerical simulation, which based on Euler-Euler model and identified the best liquid-gas ratio. The simulation results showed that: when the installation height of the square mesh was 25 mm and opening rate was 55.7%, the gas holdup distribution in the upper part of the mesh became higher and improved the liquid velocity distribution. Meanwhile, the gas-liquid distribution on trays was more uniform.
Key words: Euler-Euler model / liquid-gas ratio / gas-liquid distribution
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.