MATEC Web of Conferences
Volume 22, 2015International Conference on Engineering Technology and Application (ICETA 2015)
|Number of page(s)||6|
|Section||Mechanic and Control Engineering|
|Published online||09 July 2015|
Finite Element Analysis of Moving Platform Based on ANSYS Workbench
1 Department of Mechanical Engineering Changchun, Changchun University of Science and Technology, Changchun, Jilin, China
2 Fundamental Science on Space-Ground Laser Communication Technology Laboratory, Changchun, Jilin, China
* Corresponding author: email@example.com
The thickness and rib layout of the moving platform which is a part of 2-DOF motion platform is the main factor affecting the performance of it. This initial design scheme was analyzed by making the use of ANSYS Workbench, which controls the maximum deformation and maximum stress in the range of permission. The quality of the platform could be reduced by 35.4%; the lightweight analysis and the modal analysis were made for the platform, and had obtained inherent frequency of the platform. The holes with quadrilateral shape were adopted to ensure that the platform could have enough stiffness and stability.
Key words: 2-DOF motion platform / ANSYS Workbench / lightweight analysis / modal analysis
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.