| Issue |
MATEC Web Conf.
Volume 347, 2021
12th South African Conference on Computational and Applied Mechanics (SACAM2020)
|
|
|---|---|---|
| Article Number | 00029 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/matecconf/202134700029 | |
| Published online | 23 November 2021 | |
Using Full Field Data to Produce a Single Indentation Test for Fully Characterising the Mooney Rivlin Material Model
Department of Mechanical and Mechatronic Engineering, Stellenbosch University
* e-mail: 20380283@sun.ac.za
** e-mail: mpventer@sun.ac.za
*** e-mail: gventer@sun.ac.za
A theoretical testing method for fully characterising the Mooney-Rivlin three-parameter hyper-elastic material model is proposed by capturing full-field digital image correlation (DIC) data, namely displacement field and indentation force data. A finite element model with known parameters will act as the experimental model against which all data will be referenced (a preliminary test case). Going forward this stand-in model will be replaced with physical test data. This paper also introduces a new concept, the concept of hyperplanes. These hyperplanes represent regions in the force and displacement field data where all the objective function values are equal. The paper concludes that the Mooney-Rivlin material model can theoretically be fully characterised in a single indentation test. By applying the methods discussed in the paper when using full-field data operating under the assumption of hyper-planes.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.