| Issue |
MATEC Web Conf.
Volume 298, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2019)
|
|
|---|---|---|
| Article Number | 00042 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/matecconf/201929800042 | |
| Published online | 18 November 2019 | |
Effect of concentration and dispersion of filler fractions on adhesive strength and abrasion resistance of an epoxy and sand composite
1
Bryansk state agrarian University, 2A, Soviet Str., the village of Kokino, Vygonichskogo district, Bryansk region, 243365, Russian Federation
2
Bauman Moscow State Technical University, 5-1, 2-ya Baumanskaya Str., Moscow, 105005, Russian Federation
* Corresponding author: mihalchenkov.alexandr@yandex.ru
The increase in the adhesive strength of the epoxy and sand composite is equally regulated by the content of the sand component and the dispersiveness of its particles. The wear resistance of the composite is mainly determined by the size of sand particles, and the concentration significantly affects the degree of resistance to abrasive wear only when the fraction dispersiveness is equal to 1 mm. The maximum adhesive strength and wear resistance are characteristic for a composite of the following composition: 30 pts. wt. epoxy glue and 70 pts. wt. natural sand with a dispersiveness of 1 mm.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.