| Issue |
MATEC Web Conf.
Volume 279, 2019
10th International Scientific Conference Building Defects (Building Defects 2018)
|
|
|---|---|---|
| Article Number | 02007 | |
| Number of page(s) | 6 | |
| Section | Mechanical and Materials Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201927902007 | |
| Published online | 12 April 2019 | |
Buckling behavior of steel column with triangularly corrugated web
Ural Federal University, Department of Building Structures and Soil Mechanics, Mira Street 17a, Yekaterinburg 620002, Russia
Corresponding author: s.v.kudryavtsev@urfu.ru
The paper presents a study of behaviour of axially loaded columns that consist of two flanges and a thin triangularly corrugated web, connected by automatic welding. In the literature, the buckling behaviour of steel columns was dealt with mostly for members with plate webs. Researches of that problem for columns with corrugated webs were found out to be very limited. A parametric study is carried out for various column slenderness and corrugation densities. A general-purpose finite element analysis software ABAQUS was used. The corrugation densities adopted in this study represent practical geometries, which are commonly used for such structures in building practice. Plot showing the influence of section slenderness on value of reduction factor for lateral buckling is presented. It is determined that existing buckling curves poorly describe the dependence of the reduction factor on slenderness for axially compressed members with triangularly corrugated webs. Finally, recommendations were proposed for the design of pin-ended columns with corrugated webs at lateral buckling in accordance with numerical results.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.